Description
LEE PRECISION RAM SWAGE POCKET PRIMER KIT
The Lee Ram Swage works on all single stage or turret presses that have 7/8″-14 threads in the press frame and accept universal press shell-holders.
SPECIFICATIONS:
- Spring assisted case extraction, and an all-steel case guide, ensures cases will be positively centered on push rod.
- Shell-holderless design, allows you to swage any small or large primer pocket, without swapping to a different size shell-holder.
- Primer pocket swaging is necessary when reloading brass that have crimped primer pockets, most cases used in military or non-civilian applications have this crimp.
- Typical cases that you will encounter primer pocket crimps are 45 ACP, 223(5.56mm), 30-06, 308(7.62×51), 9mm Luger and special law enforcement 40 S&W.
- The hardened steel swage punch is automatically extracted from the primer pocket by five 400-pound force disc springs.
- Swage holder, large or small, installs in seconds into your press ram with no adjustments required.
- Primer pocket swaging is so fast you’ll want to swage all range brass.
- Nothing reduces priming problems on a progressive press more than properly swaged primer pockets. Surplus military and police department brass is a great low-cost source of cases.
- Complete swaging set includes- guided 7/8″-14 threaded swage push die, both large and small ram swage holder assemblies.
WARNING: Cancer & Reproductive Harm – www.P65Warnings.ca.gov
