Description
FEATURES
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.780″
- Overall Width: 1.1″
THIS MOUNT FITS:Colt Gold CupColt Trooper Mark 3Colt Python (does NOT fit 2020 and newer models)Colt Anaconda (does NOT fit 2020 and newer models)*Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Flat Head Cap Screws – Provided for Trijicon RMR The screws that are included with this mount require a 5/64” allen wrench for installation.WARNING: Cancer & Reproductive Harm – www.P65Warnings.ca.gov
